मालवीय राष्ट्रीय प्रौद्योगिकी संस्थान जयपुर (राष्ट्रीय महत्व का संस्थान)
Malaviya National Institute of Technology Jaipur (An Institute of National Importance)
Department of Mechanical Engineering
Go Back

43

Journal Publications

8

Conference Publications

1

Research Projects

5

PhD Research Supervised

2

Awards & Honours

Qualifications
  • Ph.D.(Tribology) from MNIT JAIPUR(2017)
    M.Tech.(Production Engineering) from IIT DELHI(2011)
    B.E.(Mechanical Engineering) from JAI NARAIN VYAS UNIVERSITY(2008)
Research Interests

NON CONVENTIONAL MACHINING, Composite Materials, Tribology.

    2024
  • S. Saini, A. Meena et al., "Optimization and Ranking of Dental Restorative Composites by ENTROPY-VIKOR and VIKOR-MATLAB." , Polymers for Advanced Technologies (Wiley) Volume :00 / / 2024 DOI: 10.1002/pat.6526.
  • Rajhans Meena, Abdul Wahab Hashmi, Faiz Iqbal, Shadab Ahmad, Chander Prakash, Jitendra Kumar Katiyar, Harlal Singh Mali and Anoj Meena, "Optimizing surface finish in FDM-printed polycarbonate spur gears through abrasive flow finishing: insights from physics and material science perspectives" , Physica Scripta (IOP Publishing Limited) Volume :99 / / 2024 DOI: 10.1088/1402-4896/ad5a52
  • Sonu Saini , Ramkumar Yadav , Sonam Sonwal , Anoj Meena , Yun Suk Huh , Eugenio Brambilla , Andrei Cristian Ionescu , "Tribological, mechanical, and thermal properties of nano tricalcium phosphate and silver particulates reinforced Bis-GMA/TEGDMA dental resin composites" , Tribology International (Elsevier) Volume :199 / / 2024 DOI: https://doi.org/10.1016/j.triboint.2024.110010
    • 2023
  • Rajhans Meena1, Abdul Wahab Hashmi2,3, Faiz Iqbal2, Shadab Ahmad3,4, Chander Prakash5, Jitendra Kumar Katiyar3, Harlal Singh Mali1 and Anoj Meena1, "Influence of fly ash on thermo-mechanical and mechanical behavior of injection molded polypropylene matrix composites" , Chemosphere (Elsevier) Volume :343 / / 2023 DOI: 10.1016/j.chemosphere.2023.140225
  • Abdul Wahab Hashmi, Harlal Singh Mali, Anoj Meena, Nakul Gupta, Shadab Ahmad, Kuldeep K Saxena, Vinayak Malik, "Abrasive Flow Finishing of Fdm Printed Extrusion Die Insert Pattern Using Novel Afm Fixture with Mandrel Guide" , Surface Review and Letters (World Scientific Publishing Company) Volume :30 / 2350034 / 2023 DOI: https://doi.org/10.1142/S0218625X23500348
  • Abdul Wahab Hashmi, Harlal Singh Mali, Anoj Meena, Shadab Ahmad, Yebing Tian , "A novel eco-friendly abrasive media based abrasive flow machining of 3D printed PLA parts using IGWO and ANN" , Rapid Prototyping Journal (Emerald) Volume :xx / / 2023 DOI: https://doi.org/10.1108/RPJ-04-2023-0136
  • Ramkumar Yadav, Mayank Singh, Anoj Meena, Seul-Yi Lee, Soo-Jin Park, "Selection and ranking of dental restorative composite materials using hybrid Entropy-VIKOR method: An application of MCDM technique" , Journal of the Mechanical Behavior of Biomedical Materials (Science Direct) Volume :147 / / 2023 DOI: https://doi.org/10.1016/j.jmbbm.2023.106103
  • Sonu Saini, Anoj Meena, Ramkumar Yadav, Amar Patnaik, " Fabrication, evaluation and performance ranking of tri-calcium phosphate and silica reinforced dental resin composite materials." , Silicon (Springer ) Volume :XX / / 2023 DOI: https://doi.org/10.1007/s12633-023-02646-6
    • 2022
  • Abdul Wahab Hashmi, Harlal Singh Mali, Anoj Meena, "Improving the surface characteristics of additively manufactured parts: A review" , Materials Today: Proceedings (Elsevier) Volume :0 / 16 / 2022 DOI: https://doi.org/10.1016/j.matpr.2021.04.223
  • Abdul Wahab Hashmi, Harlal Singh Mali, Anoj Meena, "Experimental investigation of an innovative viscometer for measuring the viscosity of Ferrofluid" , Materials Today: Proceedings (Elsevier) Volume :50 / 2037-2043 / 2022
  • Ramkumar Yadav, Hae-Hyoung Lee, Anoj Meena and Yugal Kishor Sharma, , "Effect of alumina particulate and E-glass fiber reinforced epoxy composite on erosion wear behavior using Taguchi orthogonal array" , Tribology International (Science Direct) Volume :107860 / 00423-7 / 2022
  • Abdul Wahab Hashmi, Harlal Singh Mali, AnojMeena, "A critical review of modeling and simulation techniques for loose abrasive based machining processes" , Materials Today: Proceedings (Elsevier) Volume :56(4) / 2016-2024 / 2022 DOI: https://doi.org/10.1016/j.matpr.2021.11.349
  • Abdul Wahab Hashmi, Harlal Singh Mali, Anoj Meena, Irshad Ahamad Khilji, Mohammad Farukh Hashmi, Siti Nadiah binti Mohd Saffe, "Machine vision for the measurement of machining parameters: A review" , Materials Today: Proceedings (Elsevier) Volume :56(4) / 1939-1946 / 2022 DOI: https://doi.org/10.1016/j.matpr.2021.11.271
  • Abdul Wahab Hashmi, Harlal Singh Mali, Anoj Meena, Ana Pilar Valerga Puerta, Maria Elizete Kunkel, "Surface characteristics improvement methods for metal additively manufactured parts: a review" , Advances in Materials and Processing Technologies (Taylor & Francis) Volume :0 / / 2022 DOI: https://doi.org/10.1080/2374068X.2022.2077535
  • Abdul Wahab Hashmi, Harlal Singh Mali, Anoj Meena, Kuldeep K. Saxena, Ana Pilar Valerga Puerta, Dharam Buddhi , "A newly developed coal-ash-based AFM media characterization for abrasive flow finishing of FDM printed hemispherical ball shape" , International Journal on Interactive Design and Manufacturing (IJIDeM) (Springer) Volume :00 / / 2022 DOI: https://doi.org/10.1007/s12008-022-00982-2
  • Abdul Wahab Hashmi, Harlal Singh Mali, Anoj Meena, Kuldeep K. Saxena, Ana Pilar Valerga Puerta, U. Sathish Rao, Dharam Buddhi, Kahtan A. Mohammed , "Design and modeling of abrasive flow finishing of freeform surfaces of FDM printed femoral component of knee implant pattern" , International Journal on Interactive Design and Manufacturing (IJIDeM) (Springer) Volume :0 / / 2022 DOI: https://doi.org/10.1007/s12008-022-01048-z
  • Abdul Wahab Hashmi, Harlal Singh Mali, Anoj Meena, Mohammad Farukh Hashmi, Neeraj Dhanraj Bokde, "Surface Characteristics Measurement Using Computer Vision: A Review" , Computer Modeling in Engineering & Sciences (Tech Science Press) Volume :135 / 917-1005 / 2022 DOI: https://doi.org/10.32604/cmes.2023.021223
  • Abdul Wahab Hashmi, Harlal Singh Mali, Anoj Meena, Kuldeep K. Saxena, Ana Pilar Valerga Puerta, Chander Prakash, Dharam Buddhi, J. P. Davim, Dalael Saad Abdu, "Understanding the Mechanism of Abrasive-Based Finishing Processes Using Mathematical Modeling and Numerical Simulation" , Metals (MDPI) Volume :12(8) / 1328 / 2022 DOI: https://doi.org/10.3390/met12081328
  • Abdul Wahab Hashmi, Harlal Singh Mali, Anoj Meena, "A comprehensive review on surface quality improvement methods for additively manufactured parts" , Rapid Prototyping Journal (Emerald) Volume :00 / / 2022 DOI: 10.1108/RPJ-06-2021-0133]
  • Ramkumar Yadav,Anoj Meena, "Effect of aluminium oxide,titanium oxide,hydroxyapatite filled dental restorative composite materials on physico-mechanical properties" , ceramics international (Elsevier) Volume :48 / / 2022 DOI: doi.org/10.1016/j.ceramint.2022.03.311
  • Ramkumar Yadav, Anoj Meena, Amar Patnaik, "Tribological behaviour of zinc oxide-hydroxyapatite particulates filled dental restorative composite materials" , Polymer Composites (Wiley) Volume :1-12 / / 2022 DOI: 10.1002/pc.26597
  • Naresh Kaushik, Anoj Meena and Harlal Singh Mali, "Flat end mill machining analysis of processed CrMnFeCoNi high entropy alloys" , Materials and Manufacturing Processes (Taylor and Francis) Volume :00 / / 2022 DOI: 10.1080/10426914.2022.2149785
  • Abdul Wahab Hashmi, Harlal Singh Mali, Anoj Meena, "Design and fabrication of a low-cost one-way abrasive flow finishing set-up using 3D printed parts" , Materials Today: Proceedings (Elsevier) Volume :62 / 7554-7563 / 2022
  • Abdul Wahab Hashmi, Harlal Singh Mali, Anoj Meena, Irshad Ahamad Khilji, Chaitanya Reddy Chilakamarry, "Experimental investigation on magnetorheological finishing process parameters" , Materials Today: Proceedings (Elsevier) Volume :48 / 1892-1898 / 2022
  • Abdul Wahab Hashmi, Harlal Singh Mali, Anoj Meena, "Experimental investigation on abrasive flow Machining (AFM) of FDM printed hollow truncated cone parts" , Materials Today: Proceedings (Elsevier) Volume :56 / 1369-1375 / 2022
  • Abdul Wahab Hashmi, Harlal Singh Mali, Anoj Meena, Irshad Ahamad Khilji, Mohammad Farukh Hashmi, "Artificial intelligence techniques for implementation of intelligent machining" , Materials Today: Proceedings (Elsevier) Volume :56 / 1947-1955 / 2022
  • Yadav R, Meena A, Patnaik A., "Biomaterials for dental composite applications: A comprehensive review of physical, chemical, mechanical, thermal, tribological, and biological properties" , polymers advanced technologies (Wiley) Volume :0 / 1-20 / 2022
  • Ramkumar Yadav, Anoj Meena, "Comparative study of thermo-mechanical and thermogravimetric characterization of hybrid dental restorative composite materials" , Proc. Inst. Mech. Eng. E (SAGE) Volume :000 / 0-00 / 2022
  • RamkumarYadav, AnojMeena, "Comparative investigation of tribological behavior of hybrid dental restorative composite materials" , ceramics international (Elsevier) Volume :48 / 6698-6706 / 2022
    • 2021
  • Naresh kaushik,Anoj Meena, Harlal Singh Mali, "HIGH ENTROPY ALLOY SYNTHESIS,CHARACTERISATION,MANUFACTURING & POTENTIAL APPLICATIONS:a review " , Materials and manufacturing processes (Taylor & Francis) Volume :2006223 / 0-00 / 2021
  • Sonu Saini, Dr. Anoj Meena, "A comparative study of the effect of fillers and monomer on dental restorative material" , MATERIALS TODAY: PROCEEDINGS (Elsevier) Volume :00 / 2214-7853 / 2021
  • Anoj Meena, Diksha Bisht, Ramkumar Yadav, Sonu Saini, Govind Sharan Dangayach, Amar Patnaik,Makkhan Lal Meena1, "Fabrication and characterization of micro alumina zirconia particulate filled dental restorative composite materials" , Polymer Composites (Wiley) Volume :26473 / 1-10 / 2021
  • Ramkumar Yadav, Anoj Meena, "Mechanical and two-body wear characterization of micro-nano ceramic particulate reinforced dental restorative composite materials" , Polymer Composites (Wiley) Volume :0 / 1-16 / 2021
  • Abdul Wahab Hashmi , Harlal Singh Mali , Anoj Meen, "An experimental investigation of viscosity of a newly developed natural polymer-based media for abrasive flow machining (AFM) of 3D printed ABS parts" , Journal of Engineering Research (Academic publication council Kuwait university) Volume :NA / 18 / 2021 DOI: https://doi.org/10.36909/jer.13643
    • 2020
  • Naresh Kaushik,Harry Garg, Anoj Meena, harlal Singh Mali, "Materials and design for drogue detection in air-to-air refueling" , Materials Today: Proceedings (Elsevier) Volume :00 / 123 / 2020
    • 2019
  • Sonu Saini ,Anoj Meena, "enhancement of thermal conductivity of liquid by dispersing ultrafine particles of flyash" , International Journal of Technical Research & Science (Institute of Technical and Scientific Research) Volume :2454-2024 / 7-15 / 2019
  • PriyankaMeena, AnojMeena, MukeshJangir, V.K.Sharma, I.PJain, "Mg-based Nanocomposites for hydrogen storage containing La23Nd8.5Ti1.1Ni33.9Co32.9Al0.65 alloys as additives" , Materials Today: Proceedings (Springer ) Volume :18 / 901-911 / 2019
  • Rashi Meena, Anoj Meena, Priyanka Meena and Amar Patnaik, "Dry sliding wear analysis of aluminium alloy based cylinder liner by using linear reciprocating tribometer" , Materials Research Express (IOP Science) Volume :6 / 4 / 2019
    • 2018
  • Anoj Meena, Harlal Singh Mali, Amar Patnaik and Shiv Ranjan Kumar, "Investigation of wear behavior of nanoalumina and marble dust-reinforced dental composites" , Science and Engineering of Composite Materials (Degruyter) Volume :26 / 84-96 / 2018
    • 2017
  • Sonal Janu, Shiv Ranjan Kumar, Amar Patnaik, Anoj Meena , Manish Godara, "Effect of Adding Nanosilica Particulate Filler on the Wear Behavior of Dental Composite" , Polymer Composites (Wiley) Volume : 39 / 332-341 / 2017 DOI: https://doi.org/10.1002/pc.24436
  • Anoj Meena, Harlal Singh Mali, Amar Patnaik, Shiv Ranjan Kumar, "optimization of physical,mechanical and wear properties of particulate filled dental composite" , international journal of advances in applied science and engineering (ICMDSM) Volume :5 / 0-0 / 2017
  • Anoj Meena, Harlal Singh Mali, Amar Patnaik, Shiv Ranjan Kumar, "Comparative investigation of physical, mechanical and thermomechanical characterization of dental composite filled with nanohydroxyapatite and mineral trioxide aggregate" , e-Polymers (De GRUYTER) Volume :17 / 311-319 / 2017
    • 2016
  • Anoj Meena, Harlal Singh Mali, Amar Patnaik and Shiv Ranjan Kumar, "Effect of adding nanoalumina and marble dust powder on the physical, mechanical, and thermo-mechanical characterization of dental composite" , Polymer Composites (Wiley) Volume :39 / 321-331 / 2016

    2021
  • HARLAL SINGH MALI, ABDUL WAHAB HASHMI,MANISH JANGID, ANOJ MEENA, "EXPERIMENTAL INVESTIGATION on AFF of FDM PRINTED PATTERN for EXTRUSION DIE INSERT" , ALL INDIA MANUFACTURING TECHONOLOGY,DESIGN and RESEARCH CONFERENCE(AIMTDR-2021) by :Springer at PSG COLLEGEOF TECHNOLOGY ,COIMBATORE / / 2021
  • ABDUL WAHAB HASHMI, HARLAL SINGH MALI, ANOJ MEENA, "DESIGN and FABRICATION of a LOW COST ONE -WAY ABRASIVE FLOW FINISHING SETUP USING 3D PRINTED PARTS" , ADVANCEMENT and FUTURISTIC TRENDS in MECHANICAL and MATERIALS ENGINEERING by :Materials Today Proceedings at IIT ROPAR / / 2021
    • 2020
  • Sonu Saini , Dr. Anoj Meena, "A Comparative Study of the Effect of Fillers & Monomer on Dental Restorative Material" , Advances in Materials Processing &Manufacturing Applications(ICADMA 2020) by :MNIT Jaipur at MNIT JAIPUR / / 2020
  • Om Prakash Sharma , Dr. Anoj Meena, "Study of Mechanical Properties and Wear Behaviour of Aluminium 6061 Matrix Composites Reinforced With Hematite and Titania" , Advances in Materials Processing &Manufacturing Applications(ICADMA 2020) by :MNIT Jaipur at MNIT JAIPUR / / 2020
  • Anuraksha dev ,Dr. Anoj Meena, "Mechanical and Tribological Analysis of Ni/TiC Powder Filled ZA-27 Alloy Composites" , Advances in Materials Processing &Manufacturing Applications(ICADMA 2020) by :MNIT Jaipur at MNIT JAIPUR / / 2020
    • 2019
  • Abdul Wahab Hashmi, Deepanshu Singh, Harlal Singh Mali and Anoj Meena, "Modeling and Simulation Techniques for Loose Abrasive Based Machining" , Precision, Meso, Micro and Nano Engineering (COPEN-11) by :IIT INDORE at Indore / / 2019
    • 2017
  • Anoj Meena, Harlal Singh Mali, Amar Patnaik, Shiv Ranjan Kumar, "Optimization of Physical, Mechanical and Thermo-Mechanical Properties of Dental Composite Filled With Nanohydroxyapatite and Mineral Trioxide Aggregate." , International Conference on Advances in Materials, Design, Systems and Manufacturing by :Jaipur Institute of Engineering and Technology, Jaipur at Jaipur / / 2017
  • anoj meena, "Optimization of Physical, Mechanical and Wear Properties of Particulate Filled Dental Composite" , International Conference in Advances in Materials, Design Systems and Manufacturing by :Jec Group of Colleges, Kukus, Jaipur at Jaipur / / 2017

  • Text Book, "Wear analysis of Aluminium alloy filled Cylinder liner " ISBN:978-613-9-46378-7 published by - Lambert Academic Publishing Year: 2019 authors- ANOJ MEENA AND RASHI MEENA

  • Book Chapter, "Investigation of wear characteristics of dental composites filled with nanohydroxyapatite and mineral trioxide aggregate" ISBN:B978-0-08-102194-1.00013-X published by - science direct Year: 2017 authors- AnojMeena,Harlal S.Mali, AmarPatnaik, Shiv Ranjan Kumar
  • Book Chapter, "Quality Improvement Methods for FDM Printed Parts: A Review , Fused Deposition Modeling Based 3D Printing, (Fused Deposition Modeling Based 3D Printing)" ISBN:978-3-030-68023-7 published by - Springer Year: 2021 authors- Hashmi, A.W., Mali, H.S., Meena, A
  • Book Chapter, "Advances in simulation,Product Design and Development" ISBN:978-981-19-4555-7 published by - Springer Year: 2023 authors- Harlal s. mali, naresh kaushik,siddharth k. singh & Anoj Meena
  • Book Chapter, "A critical review of mechanical-based post-processing techniques for additively manufactured parts. Book series: Post Processing Techniques for Additive Manufacturing," ISBN:9781003288619 published by - Taylor and Francis Year: 2023 authors- Abdul Wahab Hashmi, Harlal Singh Mali, Anoj Meena, Shadab Ahmad, Ana Pilar Valerga Puerta, Maria Elizete Kunkel

  • International level Conference on International Confrence on Advanced Manufacturing and Materials Processing at MNIT, jaipur, India from 24-07-2021 to 25-07-2021
  • National level Short Term Course on CAD USING Pro-e/Creo at MNIT, jaipur, India from 05-03-2019 to 09-03-2019
  • National level Workshop on Theory and Practice on Advanced Manufacturing & M echatronics Technologies at MNIT, jaipur, India from 15-05-2018 to 02-07-2018

  • member of IE (India)

    Awarded
  • Naresh Kaushik on Machinability study of CoCrFeMnNi High Entropy Alloys. Year - 2024
  • Abdul Wahab Hashmi on Improving Surface Characteristics of AM Parts by Abrasive Flow Machine Year - 2023
  • Mr. RamKumar Yadav on Effect of Particulate Filled Dental Restorative Materials on Physico-Mechanical, Thermal & Wear Analysis Year - 2022
    • Ongoing
  • Mr. Yugal Kishor Sharma on Performance evaluation of natural fiber reinforced composite Year - 2021
  • Mr. Sonu Saini on Fabrication, Characterization & Wear Analysis of Polymer Based Dental Composites Year - 2019

    2023-2024
  • Shashank Singh on Improvisation in misalignment of car Door Year - 2023-2024 (Completed)
    • 2022-2023
  • Vishal Singh on Machinability Analysis of HEA coated brass substrate for micro hole application Year - 2022-2023 (Completed)
    • 2020-2021
  • Vinayak Goswami on Astudy of Corrossion Behaviour of Equiatomic and NON-Equiatomic Cantor Alloy(High Entropy Alloy) Year - 2020-2021 (Completed)
  • Krish Nandu Sharma on Topology Optimization and Static Structural Analysis of Rigid Flange coupling in Siemens NX Year - 2020-2021 (Completed)
    • 2019-2020
  • Yugal Kishor Sharma on Investigation of physical and Mechanical Characterization of Date palm Fibre Epoxy Composite Year - 2019-2020 (Completed)
  • Manish Kumar Jangid on Experimental Investigation on abrasive flow finishing of FDM Printed Extrusion Die Insert Pattern Year - 2019-2020 (Completed)
  • Peeyush Sharma on Mechanical and tribological behaviour of Aluminium Alloy (AA7075) Matrix composite reinforced by Silicon Carbide and flyash Year - 2019-2020 (Completed)
  • Ritesh Ranjan on Experimental Investigation of the properties of sisal/glass fibre hybrid reinforced epoxy Composite Year - 2019-2020 (Completed)
    • 2017-2018
  • Om Prakash Sharma on Study of wear characteristic of hematite and Titania filled Aluminium based composites Year - 2017-2018 (Completed)
  • Diksha Bisht on Parametric Optimization of two body wear behavior of particulate filled dental composite Year - 2017-2018 (Completed)
    • 2016-2017
  • Anuraksha Dev on Design, Mechanical and Tribological Analysis of Ni and TiC based ZA-27 Alloy composites Year - 2016-2017 (Completed)
  • Rashi Meena on Dry Sliding Wear analysis of Aluminium alloy based Cylinder Liner by using Linear reciprocating tribometer Year - 2016-2017 (Completed)
    • 2015-2016
  • Nancy Chaudhary on Experimental investigation for micro electro Discharge Drilling on Co-29Cr-6Mo Alloy using tungsten electrode Year - 2015-2016 (Completed)
    • 2014-2015
  • Sonal on Mechanical and Parametric optimization of two body wear behaviour of particulate filled dental composites Year - 2014-2015 (Completed)

  • Topic: Design and Characterization of aramid and silica brake pad material Year - 2015-2016
    Arun, eslavath, guguloth, joseph (Completed)
  • Topic: Fabrication,Wear and Frictional Analysis of fiber reinforced brake pad material Year - 2014-2015
    Anand kumar, Shubham Prajapat etc. (Completed)
  • Topic: Experimental Study to assess the effect of Different electrodes on machining of Inconel 718 by EDM Year - 2013-2014
    Vinod kumar,radheshyam meena, visheshta meena etc (Completed)

Title Total Outlay
(In Lacs)		 Year Funding Agency Role
Tribological Performance characteristics of dental composite materials12.352019-2020MHRDPI

Title Total Outlay
(In Lacs)		 Year Funding Agency
Summer Internship titled Theory and Practice on Advanced Manufacturing and Mechatronics Technologies0.722018-2018TEQIP and Self Finance by Student

  • library coordinator in MNIT from - 01-01-2018 to Till Date
  • Co-ordinator workshop practice in MNIT JAIPUR from - 25-07-2016 to Till Date
  • Faculty In-charge, Foundry Shop in MNIT JAIPUR from - 06-06-2015 to Till Date
  • Coordinator, Department Industry Institute Interaction in MNIT JAIPUR from - 06-06-2015 to 15-12-2015
  • nodal officer for teqip cell in MNIT JAIPUR from - 10-10-2013 to 31-12-2013
  • co ordinator of fine arts society in MNIT JAIPUR from - 12-09-2013 to 12-09-2014
  • co ordinator sc/ st/obc / pwd development and liaison officer in MNIT JAIPUR from - 23-07-2013 to 23-07-2014

  • Best Research Paper Award for 1st International Conference on Applied Research and Engineering given by Department of Mechanical Engineering, Cape Peninsula University of Technology, Cape Town, Western Year - 2021
  • Certificate of Best Paper Award for Mechanical and Tribological Analysis of Ni/TiC powder filled ZA-27 alloy Composites given by ICADMA 2020 Sponsored by SPARC, MHRD & TEQIP -III, NIT Uttarakhand Year - 2020

SNo. Type Title Event Place Schedule
1TalkEffect of adding nanoalumina and marble dust powder on the physical, mechanical, and thermo-mechanical characterization of dental compositeThe 8th global conference on polymer and composite materialsby online Aug-2021